HIKVISION HIK-7104NI Manual page 39

Sort Channel Order
Channel layout windows are ordered by channel number. You can change the camera linked
channel number by dragging windows.
Steps
1. Go to Configuration → Camera → Camera .
2. Click Sort Channel.
3. Drag a channel window to the channel number as your desire.
4. Click Apply.
Note
After sorting channels, the device will reconnect to network cameras.
Upgrade Network Camera
The Network camera can be remotely upgraded through the device.
Before You Start
Ensure you have inserted the USB flash drive to the device, and it contains the network camera
●
upgrade firmware.
Ensure your network camera is on the same network segment with your video recorder.
●
Ensure the network connection is valid and correct.
●
Steps
1. Go to Configuration → Camera → IP Camera .
2. Click .
3. Click Yes to confirm.
4. Select the camera upgrade firmware from your storage device.
5. Click Upgrade to start upgrading. The camera will restarted automatically after upgrade
completed.
Configure Advanced Camera Parameters
You can configure advanced camera parameters like camera IP address, camera password, etc.
Before You Start
Ensure your network camera is on the same network segment with your video recorder.
●
Ensure the network connection is valid and correct.
●
Steps
1. Go to Configuration → Camera → IP Camera .
2. Click .
3. Set camera parameters like IP address, camera password, etc.
Network Video Recorder
26