HIKVISION HIK-7104NI Manual page 49

4. Set the continuous main stream/sub-stream recording parameters for the camera. Refer to
Configure Recording Parameter for details.
5. Go to Configuration → Record → Schedule .
6. Select recording type as Event. Refer to Edit Schedule for details.
Edit Schedule
Steps
1. Go to Configuration → Record → Schedule .
Continuous
Continuous recording.
Event
Recording is triggered by events.
2. Select a camera in Camera No..
3. Turn on Enable.
4. Configure the recording schedule.
Edit a. Click Edit.
Schedule b. Select a day to configure in Weekday.
c. To set an all-day recording schedule, check All Day and select schedule type.
d. To set other schedules, uncheck All Day, and set Start/End Time and
e. Click OK to save the settings and go back to upper level menu.
Network Video Recorder
Figure 5-18 Recording Schedule
schedule type.
Note
Up to 8 periods can be configured for each day. And the time periods cannot
be overlapped with each other.
36