HIKVISION HIK-7104NI Manual page 30

Set Password Resetting Email
When you forget your login pattern and password, the device will send an email contains
verification code to your email for password resetting.
Steps
1. Go to Configuration → System → User .
2. Click Password Resetting Email.
3. Enter admin password for authorization.
4. Enter an email address.
5. Click OK.
Edit Unlock Pattern
Admin user can use the unlock pattern to log in. You can change the unlock pattern or disable the
unlock pattern.
Steps
1. Go to Configuration → User .
2. Click .
3. Enter the admin password.
4. Click Unlock Pattern.
5. Turn on/off the function as your desire.
6. Set the unlock pattern if the function is enabled.
1) Use the mouse to draw a pattern among the 9 dots on the screen. Release the mouse when
the pattern is done.
Note
The pattern shall have 4 dots at least.
●
Each dot can be connected for once only.
●
2) Draw the same pattern again to confirm it.
7. Click OK.
Edit Password
If you have the device password, you can change it to a new one. The admin user can change the
passwords of other users.
Steps
1. Go to Configuration → User .
2. Edit password.
- For guest user, enter the old password and new password.
- For admin user, click
Network Video Recorder
to set a new password.
17