Tint (Command : J) (Video Only); Sharpness (Command : K) (Video Only); Osd Select (Command : L) - HP LD4200 User Manual

Data Min : 00H ~ Max : 64H

10. Tint (Command : j) (Video only)

To adjust the screen tint. You can also adjust the tint in the Picture menu.
Transmission
[k][j][ ][Set ID][ ][Data][Cr]
Data Red: 00H ~ Green: 64H (Hexadecimal code)
Refer to "Real data mapping" in the previous section of this appendix.
Acknowledgement
[j][ ][Set ID][ ][OK][Data][x]
Data Red: 00H ~ Green: 64H
* Tint Real data mapping
0 : Step -50
:
64 : Step 50

11. Sharpness (Command : k) (Video only)

To adjust the screen Sharpness. You can also adjust the sharpness in the Picture menu.
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data Min : 00H ~ Max : 64H
(Hexadecimal code)
Refer to "Real data mapping" in the previous section of this appendix.
Acknowledgement
[k][ ][Set ID][ ][OK][Data][x]
Data Min : 00H ~ Max : 64H

12. OSD Select (Command : l)

To control OSD on/off to the set.
46 Appendix C Controlling the Multiple Product ENWW