Brightness (Command : H); Color (Command : I) (Video Only) - HP LD4200 User Manual

64 : Step 100

08. Brightness (Command : h)

To adjust screen brightness. You can also adjust the brightness in the Picture menu.
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
Data Min : 00H ~ Max : 64H
Refer to "Real data mapping" as shown below.
Acknowledgement
[h][ ][Set ID][ ][OK][Data][x]
* Real data mapping
0 : Step
:
A : Step 10
:
F : Step 15
10 : Step 16
:
64 : Step 100

09. Color (Command : i) (Video only)

To adjust the screen color. You can also adjust the color in the Picture menu.
Transmission
[k][i][ ][Set ID][ ][Data][Cr]
Data Min : 00H ~ Max : 64H (Hexadecimal code)
Refer to "Real data mapping" in the previous section of this appendix.
Acknowledgement
[i][ ][Set ID][ ][OK][Data][x]
ENWW Transmission / Receiving Protocol 45