Identifying Rear Components - HP LD4200 User Manual

Component
12 Volume
13 Set (Check)

Identifying Rear Components

Figure 3-12
image)
Component
1 Power connector
2 RS-232C serial ports
3 RGB PC, HDMI/DVI Ports
4 PC Sound Jack
5 Wired Remote Control Port
6 AV Ports
7 Speaker Ports
NOTE: The line-out terminal is used to connect to the speaker, including a built-in amplifier (AMP). Be
sure the connecting terminal of the PC sound card is checked before connecting. If the Audio Out of the
PC sound card has only Speaker Out, reduce the PC volume. If the Audio Out of the PC sound card
supports both Speaker Out and Line Out, convert to Line Out using the card jumper of the program.
Refer to the manual that comes with the sound card for additional instructions.
10 Chapter 3 Setting Up the Monitor
Function
Adjusts the sound up and down.
Press to select a menu item or save changes.
Rear Components (The product image in the user guide could be different from the actual
Function
Connects the AC power cord to the monitor
Connects to RS-232 devices
HDMI supports High Definition input and HDCP (High-bandwidth Digital Content
Protection). Some devices require HDCP in order to display HD signals
Connects the audio cable to the line-out jack of the PC sound card
Connects a wired remote control to the monitor
Connects the video and audio equipment to the monitor
Connects the speakers to the monitor
ENWW