Installing The Rangehood - Sirius Satellite Radio SL906 Series Installation Instructions Manual

Table of Contents

Advertisement

SL906-L series INSTALLATION -
OFFBOARD
Before installing the appliance, make sure that
none of the parts are damaged in any way. In
case of damaged parts, contact your retailer
and do not proceed with installation. Read all
of the following instructions with care before
installing the appliance.
Use ducting within the min/max specifications
Limit the number of ducting bends.
Do not make any changes in ducting diameter
(recommended constant diameter: Ø 150 mm
Before installing the appliance - in order not to
damage the appliance itself - the metal grease filter
should be removed. These filters could be removed
by pushing the handles towards the back side of the
rangehood and pulling it downwards to unfasten it
from its slot. (Fig.2).
(Fig.2a)
(Fig.2b)
NOTE
To install the appliance please follow these
instructions:
The appliance must be installed by qualified
technicians, or where possible use a Sirius
recommended installer (see website for details).
In order to avoid damage to the electronic parts
of the appliance, please do not use additional
screws.
Essential precautions to respect before installing
the appliance are the following:
To have made a cutout on the bottom of the
cabinet which is suitable to hold the appliance in
position (fig. 3):
SL906 EM EL 520 - 501 x 265mm
SL906 EM EL 850 - 835 x 265mm
SL906 EM EL 1000 - 985 x 265mm
SL906 EM EL 1200 - 1100 x 265mm
1. Prepare the power supply - 240 volt.
2. Prepare a hole for the ducting - 160 mm
diameter.
Maximum length of ducting should not exceed 7
metres to motor - minimum 2 metres.
(SEM11) Additional 5 metres from motor to
atmosphere.
Do not use screws to fix the outlet pipe to the
rangehoods as they will prevent the movement of
non-return valves.
Limit the number of elbows in the ducting, since
each elbow reduces the duct efficiency by 1
metre. (i.e. if you use two 90° elbows, the length
of ducting must not exceed 5 metres.)
Avoid abrupt direction changes.
Use 150mm constant diameter ducting for the
whole length.
The use of Sirius ducting will increase the
warranty of the unit to 6 years.
Download motor installation manual at
www.siriusbrand.com
6
(Fig.3)
for SEM 11, 21, or 51

Advertisement

Table of Contents
loading

Table of Contents