Table of Contents
Advertisement
INSTALLING THE
COOKER HOOD
1. Before carrying out the appliance installation, please check that all components are not damaged, in
such a case contact your retailer and do not carry out any installation operation. Before the installation
of the Downdraft, please remove the safety piece you can see in the picture (Fig. 1).
Furthermore, please read carefully all of the following installation instructions.
• Use an air exhausting pipe whose maximum length does not exceed 5 meters.
• Limit the number of elbows in the piping,since each elbow reduces the air capacity of 1 linear meter.
(Ex. : if you use no. 2 x 90 ° elbows, the length of piping should not exceed 3 meters).
• Avoid abrupt direction changes.
• Use a 150 mm. constant diameter pipe for the whole length.
• Use piping approved by standards in force.
The manufacturer shall not be deemed responsible for air capacity or noise problems caused by failure
to comply with the above instructions and no warranty on the product shall be provided.
2. Before making the hole, check that there are no structural or other parts inside the cabinet, where
the appliance is to be placed, which could hinder a proper installation. Check that the dimensions of the
Downdraft and the ones of the cook top are compatible with the cabinet so that the installation can be
carried out properly.
SU-DD2-L
EN
5
Advertisement
Table of Contents
