Walker H38i Operator's Manual page 31

Assembly Instructions
Tilt­Up Hook and
Latch Connected
Tilt­Up Tilt­Up
Latch Hook
Deck Secured in TILT-UP Position
Tilt Bar
Hitch Pin
CHECK MOWER
SHARPNESS, AND SECURITY OF MOUNTING
The blade mounting nuts on gear driven decks
should be torqued to 60 lb
mounting bolts on belt driven decks should be
· ·
torqued to 70 lb ft (95 N
required, refer to CHECKING/SERVICING for
Sharpen Mower Blades in Maintenance Instruc­
tions.
ADJUST MOWER CUTTING HEIGHT, IF
REQUIRED
Refer to ADJUSTING CUTTING HEIGHT in Oper­
ating Instructions.
PERFORM ANY ADDITIONAL PROCEDURES
called for on the MAINTENANCE SCHEDULE
CHART in Maintenance Instructions.
BLADE CONDITION,
· ·
ft (81 N m) and the blade
m). If blade sharpening is
27