Table of Contents
Advertisement
Illustration and Parts Description
The control box has a magnetic base enabling it to be positioned anywhere on the lathe.
(Green button) to turn ON and (Red button) to switch OFF
Electronic inverter control box
• The tailstock has an integrated digital display for accurate
measuring. Wind the tailstock wheel and read the digital display until
required length is reached. Press the mm/inch 'BLUE' button to change
display from metric to Imperial. Press the 'YELLOW' button reset the
display to 'ZERO' and press the 'RED' button to power off the unit.
Turn the switch to (O) thus
isolating the lathes power
Battery compartment
• The digital display has a cover to protect the unit whilst the lathe is
in operation and to prevent the display being accidently reset.
• The digital display is powered by an 1.5V SR44 battery
14
A
B
Forward and Reverse switch, (A), Speed
Control Knob (B), enables you to increase
or decrease the speed of the spindle
Turn the switch to the (I) position to put
power to the main control box
Tailstock barrel locking handle
Advertisement
Table of Contents
