Directions For Use; Running-In Recommendations - Ducati Multistrada 1000DS Owner's Manual

DIRECTIONS FOR USE

Running-in recommendations

Max. rotation speed (fig. 35)
E
Rotation speed (rpm) for running-in period and during
standard use:
1) up to 1000 km;
2) from 1000 to 2500 km;
3) after 2500 km.
Up to 1000 km
During the first 1000 km, keep an eye on the revolution
meter. The indicator must not exceed:
5,500-6,000 rpm.
During the first hours of riding, it is advisable to run the
engine at varying load and rpm, though still within
recommended limit. To this end, roads with plenty of
bends and even hilly areas are ideal for a most efficient
running-in of engine, brakes and suspensions.
For the first 100 km, use the brakes gently. Do not brake
violently or keep brake applied for too long. This will enable
a correct break-in of friction material on brake pads against
brake discs.
44
For all mechanical moving parts to adapt to one another
and above all not to adversely affect the life of basic engine
parts, it is advisable to avoid harsh accelerations and not to
run the engine at high rpm for too long, especially uphill.
Furthermore, the drive chain should be inspected
frequently. Lubricate as required.
From 1000 to 2500 km
At this point, you can squeeze some more power out of
your engine, being careful, however, to never exceed
7,000 rpm.
Important
During the whole running-in period, the maintenance
and service rules recommended in this manual should be
observed carefully. Have the service inspections
performed as recommended in the Warranty Card.
Failure to comply with these rules will release Ducati
Motor Holding S.p.A. from any liability whatsoever for
resulting engine damage or shorter engine life.