Ivoclar Vivadent Programat P510 G2 Operating Instructions Manual page 43

The following settings can be changed in the Settings menu:
Temperature unit
You can choose between °C and °F.
Setting options: °C / °F
Vacuum unit
You can choose between mbar and hPa.
Setting options: mbar / hpa
Vacuum quality
Setting the final vacuum value. This value defines the negative pressure in the furnace head at which the
furnace has reached a vacuum quality of 100%.
Setting options: 0–200 mbar
Language
Select the desired operating language.
Setting options: German, English, Italian, French, Spanish, Portuguese, Swedish, Dutch, Turkish, Russian,
Polish, Croatian, Traditional Chinese, Mandarin Chinese, Finnish, Norwegian, Slovenian, Czech, Slovakian,
Hungarian, Hindi, Japanese, Korean, Arabic, Farsi
Volume
Select the desired volume of the acoustic signals.
Setting options: OFF / 10–100 % in 10% steps
Melody
Select the desired melody for the acoustic signal.
Setting options: Melody 1 to 20
Time
Set the current time.
Setting options: hh:mm:ss
Date
Set the current date.
Setting options: according to the set date format
Date format
Set the date format.
Setting options: dd:mm:yyyy; mm:dd:yyyy
Time zone
Set the respective time zone.
Setting options: from 11 to +12 hours (revolving)
Automatic power-saving mode
If the power-saving mode is activated and the furnace head closed, this function is automatically started
after 30 minutes, if the furnace is on stand-by and no key is pressed during that time.
The display shows the power-saving icon. Pressing any key ends the automatically activated power-saving
function.
Setting options: On / Off
Optical Status Display (OSD)
Here, the OSD can be switched on or off.
Setting options: On / Off / 10 – 100 % in 10% steps
Display brightness
Set the display brightness.
Setting options: 20–100 % in 10% steps
User code
The user code can be individually changed.
It is recommended to make a note of the changed user code and keep it separately.
If forgotten, the user code may only be reset with the help of the After Sales Service.
Setting options: 1000 to 9999
5. Operation and Configuration
43