Ivoclar Vivadent Programat P510 G2 Operating Instructions Manual page 31

5. Operation and Configuration
Selecting the IRT operating mode
By pressing the [IRT] button, the menu for selecting the IRT operating mode is opened.
1. Press the [IRT] button.
2. Select the desired IRT operating mode.
The menu is automatically closed once the desired operating mode
has been selected. The selected IRT mode is displayed in the program
display next to the [IRT] button.
Two-stage programs
A two-stage program permits firing procedures on two temperature levels with different parameters (e.g. Holding time
Stage 1, Holding time Stage 2) to be conducted.
The function "two-stage program" can be selected in the Options menu.
The program screen now shows the symbol "two-stage program"
next to the [Options] button and the firing curve for the parameter
entry is indicated in two stages.
Automatic plausibility check of the parameters
The furnace is equipped with an automatic plausibility check function. The parameters are checked upon each program
start. In case of contradictory parameter combinations, the program stops automatically and the respective information is
indicated.
31