Mounting (For Customer) ����������������������������������������������������14 Ventilation Requirements; Prevent Tipping ������������������������������������������������������������������14 Mounting On Walls Or Ceilings - NEC E438 User Manual

Mounting (for Customer)

ARNINNN:
Please refer to


Contact your supplier as they may be able to provide a list of qualified installation professionals. Mounting the product on a wall
or ceiling and hiring a technician are the customer's responsibility.
Maintenance
• Periodically check for loose screws, gaps, distortions, or other problems that may occur with the mounting equipment. If a
problem is detected, refer to the qualified personnel or the supplier for service.
• Depending on the environment, the mounting location may weaken due to natural degradation. Regularly ask the qualified
personnel to inspect the mounting location and carry out maintenance.
NEC Display Solutions assumes no responsibility regarding any damage that may be caused by inadequate installation, misuse,
modification of the product, natural disasters, or other such causes.
When asking the qualified personnel for installation, inform them of the precautions mentioned in "Mounting (for Trained
Installers)".
Prevent Tipping

ARNINNN:
Please refer to


E658/E558
E498/E438/E328
Commercially-available
clamp
"WARNING 7", "WARNING
"WARNING 7", "WARNING
Commercially-available cord or chain
E498/E438: 400 mm
E328: 100 mm
Commercially-available screw
(M6, 15 mm)
8", "WARNING 9", "WARNING
9", and "WARNING
Screw hole
Commercially-available
cord or chain
English - 14
10", and "WARNING
10".
12".