NEC E438 User Manual page 53

Chapter 6
This Chapter IncludesN:
"Controlling the Monitor via RS-232C" on page 51
>
"Controlling the Monitor via LAN" on page 52
>
"HTTP Browser" on page 53
>
"Commands" on page 57
>
Connecting an external device
There are two options to connect an external device to control the monitor.
• RS-232C Interface
Connecting an external device to the RS-232C terminal of the monitor.
• Network (LAN) Interface
Connecting a network to the LAN port of the monitor with a LAN cable.
External Control
English - 50