Setup Overview ������������������������������������������������������������������11 Orientation - NEC E438 User Manual

Setup Overview
1. Determine the installation location

ARNINNN: Please refer to


NOTEN: To avoid scratching the LCD panel, always place a soft cloth, such as a blanket that is larger than the monitor's


screen area, on the table before laying the monitor face down when installing the monitor stand or mounting
accessories.
2. Install the remote control batteries
The remote control is powered by two 1.5 V AAA batteries.
To install or replace batteries:
CAUTIONN:
Please refer to


NOTEN:
• The batteries supplied with the remote control may become empty quickly depending on their condition.


Therefore, replace them with new batteries early.
• If you do not intend to use the remote control for a long period of time, remove the batteries.
3. Connect external equipment
• To protect the external equipment, disconnect the power cord of the monitor before making connections.
• Refer to the user's manual of your equipment for further information.
NOTEN:
Do not connect or disconnect cables when the monitor's main power or other external equipment's power is turned


on.
"WARNING 7", "WARNING
1
"CAUTION 8".
8", "WARNING 9", "WARNING
2
English - 11
10", and "WARNING 12".
4
3