Table of Contents
Advertisement
Bluetooth module
NOTE:
The Bluetooth module spare part kit does not include a Bluetooth module cable. The Bluetooth
module cable is included in the Cable Kit, spare part number 607975-001.
Description
Bluetooth module
Before removing the Bluetooth module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
a.
Memory module/wireless module compartment cover (see
b.
Hard drive cover (see
c.
Keyboard (see
d.
Top cover (see
Remove the Bluetooth module:
1.
Disconnect the Bluetooth module cable (1) from the system board.
2.
Release the Bluetooth module cable from the routing clips (2) built into the base enclosure.
3.
Remove the Bluetooth module (3) and cable.
Reverse this procedure to install the Bluetooth module and cable.
66
Chapter 4 Removal and replacement procedures
Battery on page
44), and then remove the following components:
Hard drive on page
Keyboard on page
59)
Top cover on page
62)
Memory module on page
53)
Spare part number
537921-001
45)
ENWW
Advertisement
Table of Contents
