Subscribe to Our Youtube Channel
Related Manuals for Yealink BOGEN NQ-T2000
Summary of Contents for Yealink BOGEN NQ-T2000
- Page 1 Enterprise IP Phone NQ-T2000 Quick Start Guide Applies to firmware version 124.86.78.1 or later.
- Page 2 Handset Quick Start Guide Power Adapter (NQ-T200: Optional) We recommend that you use the accessories provided or approved by Yealink. The unapproved third-party accessories may result in reduced performance. Assembling the Phone 1. Attach the stand: You can also mount the phone to a wall.
- Page 3 PoE Hub/Switch The IP phone should be used with Yealink original power adapter (5V/600mA) only. The use of the third-party power adapter may cause the damage to the phone. If you are connecting a PC to your phone, we recommend that you use the Ethernet cable provided by Yealink.
- Page 4 Configuring Your Phone Configuring via web user interface Accessing the web user interface: 1. Press (the OK key) when the phone is idle to obtain the IP address of the phone. 2. Open a web browser on your computer, enter the IP address into the address bar (e.g., "http://192.168.0.10" or "192.168.0.10") and then press the Enter.
- Page 5 Call Hold Placing a Call To place a call on hold: Using the handset: Press the Hold soft key during an active call. 1. Pick up the handset. 2. Enter the number and press the Send soft key. To resume the call, do one of the following: Using the speakerphone: •...
- Page 6 If you press the Option soft key, you can also do the Call Conference following: • Select Detail to view detailed information about the 1. Press the Conf soft key during an active call. The entry. call is placed on hold. 2.
Need help?
Do you have a question about the BOGEN NQ-T2000 and is the answer not in the manual?
Questions and answers