The Fcc Wants You To Know; Replacing A Fuse - Optimus XL-200 Manual

XL-200 Bridgeable Amplifier
(120-2016)
Your Optimus XL-200 High Power 2/1 Channel Bridgeable Amplifier is an
example of superior design and craftsmanship.
will help you care for your amplifier so you can enjoy it for years.
Keep the amplifier dry.
Liquids might contain minerals that can corrode the electronic circuits.
Keep the amplifier away from dust and dirt, which can cause premature
wear of parts.
Handle the amplifier gently and carefully.
circuit boards and cases and can cause the amplifier to work improperly.
Wipe the amplifier with a damp cloth occasionally to keep it looking
new.
Do not use harsh chemicals, cleaning solvents, or strong detergents to
clean the amplifier.
Modifying or tampering with the amplifier's internal components can cause a
malfunction and might invalidate your amplifier's warranty and void your
FCC authorization to operate it.
should, take it to your local RadioShack store for assistance.

THE FCC WANTS YOU TO KNOW

Your amplifier might cause TV or radio interference even when it is
operating properly.
interference, turn off your amplifier.
your amplifier is causing it.
Moving your amplifier away from the receiver
Contacting your local RadioShack store for help

REPLACING A FUSE

If the amplifier does not operate, you might need to replace the red power
cable's 30-amp SFE-type fuse or the 20-amp blade-type fuse on the
amplifier's back panel.
Important: Let the amplifier cool down and see if starts again before
you assume a fuse needs to be replaced.
Care and Maintenance
If it gets wet, wipe it dry immediately.
If your amplifier is not performing as it
To determine whether your amplifier is causing the
Try to eliminate the interference by:
Check both fuses.
Faxback Doc. # 44454
The following suggestions
Dropping it can damage
If the interference goes away,