Residual Risks; Markings On Tool - DeWalt DW040 Original Instructions Manual

• Do not use the laser for any purpose other than the intended uses
described in this document. An exposure of the eye to the beam of
a class 2 laser is considered safe for a maximum of 0.25 seconds.
Eyelid reflexes will normally provide adequate protection.
• Before first use, read all the safety warnings on the label!
• Always set up the laser at a position where the laser beam cannot
cross any person at eye level. Be extra alert for the presence of
stairs and specular surfaces.

Residual Risks

The following risks are inherent to the use of this device:
– injuries caused by staring into laser beam.

Markings on Tool

The following pictographs are shown on the tool:
Read instruction manual before use.
Laser warning.
Do not stare into the laser beam.
Protection class: IP54.
E NGLI SH
43