Residual Risks; Markings On Tool - DeWalt DW089K-XJ Manual

E NGLIS H
An exposure of the eye to the beam of a class 2 laser is considered
safe for a maximum of 0.25 seconds. Eyelid reflexes will normally
provide adequate protection. At distances over 1 m, the laser complies
with class 1 and thus is considered completely safe.
• Never look into the laser beam directly and intentionally.
• Do not use optical tools to view the laser beam.
• Do not set up the tool at a position where the laser beam can
• Do not let children come in contact with the laser.

Residual Risks

The following risks are inherent to the use of this device:
– injuries caused by staring into laser beam.

Markings on Tool

The following pictographs are shown on the tool:
56
DW089K-XJ_DW89CG-XJ User Manual - EU - FEB 2019 - Part A.indd 56
cross any person at head height.
Read the instruction manual before use.
Laser warning.
Do not stare into the laser beam.
2/7/2019 10:35:52 AM