To Use Manual Power Management With Windows 98 - HP OmniBook XE Setup Manual

To use manual power management with Windows 98

You can shut down your OmniBook manually whenever you need to with any of the
following three levels of shutdown.
System standby
Action Turns off the display and hard disk drive.
Saves current session to RAM.
When Fn+F3 or Fn+F4 or Start, Shut Down,
Standby.
Resume Press the blue power button to return to
your current session.
System standby can also occur automatically when the timeout setting in the Power
Management Properties window is reached.
Hibernate
Action Saves the current session to disk, then
shuts down. Provides maximum power
savings while still allowing you to recover
the current session.
When Press Fn+F5.
Resume Press the blue power button to recover
your current session. This takes several
seconds.
Hibernate can also occur automatically when:
Battery power reaches a critically low level (see "To respond to a low-battery
warning" on page 42).
The timeout setting in the BIOS Setup utility is reached (default is 2 hours after
System standby occurs).
Traveling with Your Computer
Managing Power Consumption
Setup Guide 39