Battery Safety; Laser Safety - HP OmniBook XE Setup Manual

Specifications and Regulatory Information
Safety Information

Battery Safety

To avoid risk of fire, burns, or damage to your battery pack, do not allow a metal
object to touch the battery contacts.
The battery pack is suitable for use only with compatible OmniBook models. Check
the Support and Service section of this Setup Guide for your local HP contact.
Do not disassemble. There are no serviceable parts inside. Do not dispose of the
battery pack in fire or water.
Handle a damaged or leaking battery with extreme care. If you come in contact with
the electrolyte, wash the exposed area with soap and water. If it contacts the eye,
flush the eye with water for 15 minutes and seek medical attention.
Do not expose the battery pack to high storage temperatures (above 60° C,
140° F).
When the battery is not in use, store it in the battery pouch provided.
To obtain a replacement battery, contact your local dealer or HP sales office.
Do not charge the battery pack if the ambient temperature exceeds 45° C (113° F).
When discarding a battery pack, contact your local waste disposal provider regarding
local restrictions on the disposal or recycling of batteries.

Laser Safety

The CD-ROM and DVD drives used with the OmniBook are certified as Class 1 laser
devices according to the U.S. Department of Health and Human Services (DHHS)
Radiation Performance Standard and International Standards IEC 825 / IEC 825-1
(EN60825 / EN60825-1). These devices are not considered harmful, but the following
precautions are recommended:
Ensure proper use by reading and following the instructions carefully.
If the unit requires service, contact an authorized HP service center—see the
OmniBook Support and Service section of this Setup Guide.
66 Setup Guide