Led Safety - HP OmniBook XE Setup Manual

Do not attempt to make any adjustment of the unit.
Avoid direct exposure to the laser beam—do not open the unit.

LED Safety

The infrared port located on the back panel of the OmniBook is classified as a Class 1
LED (light-emitting diode) device according to International Standard IEC 825-1
(EN60825-1). This device is not considered harmful, but the following precautions are
recommended:
If the unit requires service, contact an authorized HP service center—see the
OmniBook Support and Service section of this Setup Guide.
Do not attempt to make any adjustment of the unit.
Avoid direct eye exposure to the infrared LED beam. Be aware that the beam is
invisible light and cannot be seen.
Do not attempt to view the infrared LED beam with any type of optical device.
Specifications and Regulatory Information
Safety Information
Setup Guide 67