To Use Manual Power Management - HP Pavilion N3210 Setup Manual

Traveling with Your Computer
Managing Power Consumption

To use manual power management

You can shut down your computer manually whenever you need to with any of the
following three levels of shutdown.
System standby
Turns off the display and hard disk drive.
Action
Fn+F3 or Fn+F4 or Start, Shut Down,
When
Standby.
Resume Press the blue power button to return to
your current session.
System standby can also occur automatically when the timeout setting in the Power
Management Properties window is reached. (In Windows 98, there is no difference
between Standby and Suspend.)
Hibernate
Action Saves the current session to disk, then
shuts down. Provides maximum power
savings while still allowing you to recover
the current session.
Press Fn+F5.
When
Press the blue power button to recover
Resume
your current session. This takes several
seconds.
Hibernate can also occur automatically when:
Battery power reaches a critically low level (see "To respond to a low-battery
warning" on page 57).
The timeout setting in the BIOS Setup utility is reached (default is one hour after
System standby occurs).
54 Setup Guide