Expanding The Hibernate Partition - HP OmniBook XE Setup Manual

Expanding the Hibernate Partition

C A U T I O N This procedure will format the hard disk drive and erase all data on the disk. Be
sure to back up all data from your hard disk before you begin this procedure. After
the hard disk drive is formatted, you'll need to reinstall any applications.
You can create the Hibernate partition by booting from the Recovery CD. The
partitioning and recovery process takes approximately 20 minutes—do not interrupt the
process or unplug the AC adapter until the process is completed.
1. Back up all data from your hard disk.
2. If you wish to install additional RAM, do so now.
3. Connect the AC adapter to the computer.
4. Insert the Recovery CD in the CD-ROM (or DVD) drive. (If your system came with
two Recovery CDs, insert Disc 1.)
5. Restart the computer, and when you see the HP logo, press ESC twice.
6. Select the CD-ROM drive as the boot device, and press ENTER.
7. Choose Continue.
8. Choose Advanced.
9. Select a size from the Hibernate Partition Size drop-down list.
10. If you want to create a Hibernate partition without recovering the operating system,
select the "Do not load operating system" checkbox and select one of the partition
options.
11. Choose Continue.
12. Click OK to begin.
If your system came with two Recovery CDs, you may be prompted to insert the
other Recovery CD during the partitioning process.
13. When you are prompted to reboot your computer, remove the Recovery CD and press
Ctrl+Alt+Delete.
14. Follow the onscreen instructions for setting up Windows.
15. When Windows setup is complete, reinstall any applications and restore backed up
data.
Configuring and Expanding the OmniBook
Expanding the Hibernate Partition
Setup Guide 47