Cd And Dvd Problems - HP OmniBook 500 Reference Manual

If sound does not record
• Check the software controls for recording sound: click Start, Programs (or All
Programs), Accessories, Multimedia (or Entertainment), Sound Recorder.
• In Volume Control, click Options, Properties, and make sure the microphone is
enabled in the recording controls.
• Test the audio with the e-Diagtools diagnostics—see "Testing the Hardware" on
page 133.
If you hear a loud high-pitched whine (feedback) from the speakers
• In the Volume Control, try reducing the Master volume: double-click the speaker icon
in the taskbar.
• In Volume Control, click Options, Properties, and select the microphone option for
the playback settings. Then in Volume Control, make sure the microphone is muted.
• Avoid using the built-in microphone and built-in speakers at the same time.

CD and DVD problems

If you can't boot from a CD or DVD in the CD/DVD drive
• Make sure the CD or DVD is bootable, such as the Recovery CD.
• Make sure the CD-ROM/DVD drive is selected as the boot device—see "To change
the boot device" on page 32.
• Restart the computer: click Start, Shut Down (or Turn Off Computer), Restart.
• Test the CD/DVD drive with the e-Diagtools diagnostics—see "Testing the
Hardware" on page 133.
If a DVD plays erratically
• Dirt or smudges can cause a disc to skip. Clean the disc with a soft cloth. If the disc is
badly scratched, it will probably have to be replaced.
•
Some DVDs include software called "PC Friendly." You generally should not install
this software, as it can cause errors or erratic play. If needed, uninstall itand restart
your system.
Troubleshooting and Maintenance
Troubleshooting Your Computer
Reference Guide 111