To Reset The Omnibook; To Transport The Omnibook; Using The Omnibook Pointing Devices - HP OmniBook 4100 User Manual

At startup, resets everything, starts
a new session, and restores
network connections.
* Preserving network connections. A plug-and play operating system, such as
Windows 95, can restore network connections when you turn on the OmniBook.
For Windows NT 4.0 or a different operating system, you may have to reset the
OmniBook or restart the operating system to restore them.
** Windows 95 only.
Hint
Time-out settings. In order to save power or, conversely, to increase speed, you
can change the time-out
various components after periods of inactivity. There are separate time-out settings
for each power mode.

To reset the OmniBook

If Windows or the OmniBook stops responding, you can reset the OmniBook and
restart Windows.
1. If possible, shut down Windows.
2. Insert a pen or a straightened paper clip into the system-off button.
–or, if this fails–
Press and hold the blue power button until the display shuts down.
3. After the computer shuts down, press the blue power button to turn it back on.

To transport the OmniBook

1. Save your work.
2. From the Start menu, click Shut Down.
3. Disconnect all external devices.
4. Close the lid.

Using the OmniBook Pointing Devices

display shuts down.
settings. Time-out settings specify when to shut down
12