To Insert Or Eject A Floppy Disk; To Insert Or Remove A Cd - HP OmniBook 4100 User Manual

4. Grasp the underside of the module firmly and pull out.
5. With the latch in the open position, slide the new plug-in module into the
OmniBook until it is flush with the unit.
6. Close the module release latch.
Hint
The battery module fits into either the plug-in module bay or the battery bay.

To insert or eject a floppy disk

Caution
Do not insert or remove a floppy disk while the OmniBook is actively reading
or writing data. Wait until the floppy drive is done. Otherwise, you could lose
data or the OmniBook could stop responding.
Hold the disk with its face up, then slide it into the floppy drive slot (on the front
of the OmniBook) until it clicks into place.
To remove the floppy disk, press the eject button next to the slot.

To insert or remove a CD

Caution
Do not insert or remove a CD while the OmniBook is actively reading data.
Wait until the CD-ROM drive is done. Otherwise, the OmniBook could stop
responding.
1. Press the button on the face of the CD-ROM drive.
2. If you are using this drive for the first time, be sure to remove the cardboard
packing insert.
28