Operating The Omnibook; Powering The Omnibook; To Connect Ac Power - HP OmniBook 4100 User Manual

Hp omnibook 4100: user guide

Hide thumbs Also See for OmniBook 4100:

Table of Contents

Improper use of keyboards and other input devices has been associated with

ergonomic injury. For information about reducing your risk, see Working in

Comfort shipped with your OmniBook, or visit our ergonomics website,

http://www.hp.com/ergo.

2. Operating the OmniBook

Starting and Stopping the OmniBook.

Using the OmniBook Pointing Devices.

Using the OmniBook Display.

Adjusting the Sound System.

Using the OmniBook Keyboard.

Checking the Status of the OmniBook.

Protecting the OmniBook.

Powering the OmniBook

There are two ways to power the OmniBook: by ac adapter and by battery.

Caution

Use only the HP adapter intended for this product, model F1454A. Using any

other ac adapter could damage the OmniBook and may void your warranty.

Refer to the warranty statement for your product.

1. Connect the power cord to the ac adapter, then plug the cord into an ac outlet.

The light on the ac adapter shines when the adapter is powered.

2. Connect the ac adapter to the OmniBook, as shown.

Table of Contents