Adjusting The Sound System; To Adjust The Volume Manually; To Adjust The Volume In Windows; Using The Omnibook Keyboard - HP OmniBook 4100 User Manual

Observe the following guidelines to extend the life of the backlight in the OmniBook
display.
Set the brightness to the lowest comfortable setting (Fn+F1).
When working at your desk, connect an external monitor and turn off the internal
display (Fn+F5).
Avoid using a screen saver or other software that prevents the OmniBook from
changing to Suspend or Standby mode after a time-out period.
Do not disable Suspend and Standby time-outs.
If you are using ac power and have no external monitor attached, change to
suspend or standby when not in use.

Adjusting the Sound System

To adjust the volume manually.

To adjust the volume in Windows.

The OmniBook supports Sound Blaster Pro-compatible sound and the Microsoft
Windows Sound System.
To adjust the volume manually
To increase the volume, press Fn+UP-ARROW.
To decrease the volume, press Fn+DOWN-ARROW.
To temporarily silence the speaker without changing the volume setting, press
the mute button
To adjust the volume in Windows
1. Click the speaker symbol in the taskbar.
2. Drag the volume control bar up or down to adjust the volume.
3. To temporarily silence the speaker without changing the volume setting, click
Mute.

Using the OmniBook Keyboard

To use the Fn hot keys.
To use the Windows keys.
To use the embedded keypad.
To use the Alt Gr key.
Warning
Improper use of keyboards and other input devices has been associated with
ergonomic injury. For information about reducing your risk, see Working in
on the right side of the OmniBook.
16