To Activate Full Touch Pad Capabilities; To Activate Full Pointing Stick Capabilities - HP OmniBook 4100 User Manual

To drag an item, move the pointer over the item. Press and hold the left
button while you move the pointer to the new location. Release the button.

To activate full touch pad capabilities

The built-in pointing stick driver supports only basic touch pad features. To activate
full touch pad capabilities, you have to
Select a new mouse driver and remove the pointing stick driver.
Disable the pointing stick.
Install touch pad support.
Select a new mouse driver and remove the pointing stick driver
1. From the Start menu, click Settings, Control Panel.
2. Double-click Add/Remove Programs and remove IBM TrackPoint Support.
3. Double-click Mouse, then click General.
4. Click Change and then select Show All Devices.
5. Under Manufacturers, click Standard Mouse Types.
6. Under Models, change the mouse type to Standard PS/2 Port Mouse, then click
OK.
Disable the pointing stick
1. From the Start menu, shut down, then restart the OmniBook.
2. When you see the HP logo, press F2 to enter the BIOS Setup utility.
3. Select the System Devices menu.
4. Highlight Internal Pointing Devices and select Touch Pad.
5. Press F10 to save and exit.
Install touch pad support
For Windows 95. Run c:\omnibook\drivers\win95\touchpad\setup.exe.
For Windows NT 4.0. Run c:\omnibook\drivers\nt40\touchpad\install.exe.

To activate full pointing stick capabilities

If you have activated full touch pad capabilities, you can use this procedure to switch
back to full pointing stick capabilities. You have to
Remove the touch pad driver (Windows 95 only).
Enable the pointing stick.
Install pointing stick support.
Remove the touch pad driver
From Control Panel, click Add/Remove Programs and remove touch pad
support.
14