Making Connections; Using Plug-In Modules And Storage Media; To Replace A Plug-In Module - HP OmniBook 4100 User Manual

4. Making Connections

Using Plug-In Modules and Storage Media.

Connecting External Devices.
Using PC Cards.
Using Docking Products.
Using Plug-In Modules and Storage Media

To replace a plug-in module.

To insert or eject a floppy disk.
To insert or remove a CD.
The OmniBook Plug-In Modules User's Guide describes OmniBook accessory
modules and shows you how to install and use them. The OmniBook's module bay
accommodates the following:
CD-ROM drive
Floppy disk drive.
LS-120 drive.
DVD drive.
Second battery.
To replace a plug-in module
Caution
If you are inserting or removing a CD-ROM drive, floppy disk drive, LS-120
drive, or DVD drive, shut down the OmniBook.
1. From the Start menu, shut down the OmniBook. (This is not necessary if you are
removing a battery from the plug-in module bay and inserting another battery).
2. Slide the module release latch forward as far as it will go.
3. Gently pull the release latch back until the module pops out.
27