Figure 65 Qos Class Setup; Table 40 Qos Class Setup - ZyXEL Communications P-870HW-51a v2 User Manual

Figure 65 QoS Class Setup

The following table describes the labels in this screen.

Table 40 QoS Class Setup

LABEL
Add
Class Name
Order
CLASSIFICATION CRITERIA
This section shows criteria specified in this classifier.
Class Intf
Ether Type
SrcMAC /Mask
DstMAC /Mask
SrcIP/Mask
DstIP/Mask
Proto
Src Port
Dst Port
DSCP Check
802.1P Check
CLASSIFICATION RESULTS
Queue Key
DSCP Mark
802.1P Mark
VlanID Tag
Rate Control
Active
P-870HW-51a v2 User's Guide
DESCRIPTION
Click this button to create a new classifier.
This is the name of the classifier.
This field displays the index number of the classifier.
This shows the interface through which traffic that matches this classifier is
forwarded out.
This is the service type.
This shows the source MAC address and the mask of traffic of this class.
This shows the destination MAC address and the mask of traffic of this class.
This shows the source IP address, the source subnet mask and DHCP option 60
or DHCP option 77.
This shows the destination IP address and the destination subnet mask.
This shows the protocol type.
This shows the source port number.
This shows the destination port number.
This is the DSCP value of traffic of this class.
This shows the 802.1P priority level.
This is the index number of a queue you configured in the Queue Setup screen.
This is the DSCP number added to traffic of this classifier.
This is the IEEE 802.1p priority level assigned to traffic of this classifier.
This is the VLAN ID number assigned to traffic of this classifier.
Select the check box to enable this classifier.
Chapter 11 Quality of Service (QoS)
121