Hard Drive - HP Mini 210-2000 Maintenance And Service Manual

Hard drive

NOTE: The hard drive spare part kit includes a bracket and screws.
Description
Hard drive:
320-GB, 7200-rpm
250-GB, 7200-rpm
160-GB, 7200-rpm
Hard Drive Hardware Kit (includes hard drive bracket and screws)
Before removing the hard drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the following components:
a. Battery (see
b. Service access cover (see
Remove the hard drive:
1. Disconnect the hard drive cable (1) from the system board.
2. Remove the 3 Phillips 2.0x4.0 screws (2) that secure the hard drive to the computer.
Battery on page 31).
Service access cover on page
Spare part number
627731-001
613047-001
622655-001
626589-001
34).
Component replacement procedures 37