Power connector cable
Description
Power connector cable
Before removing the power connector cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the following components:
a.
Battery (see
b.
Service access cover (see
c.
Hard drive (see
d.
Keyboard (see
e.
Top cover (see
f.
Display assembly (see
g.
System board (see
Remove the power connector cable:
Remove the power connector cable by grasping the connector and removing it from the base
enclosure.
64
Chapter 4 Removal and replacement procedures
Battery on page
31).
Service access cover on page
Hard drive on page
Keyboard on page
46).
Top cover on page
49).
Display assembly on page
System board on page
34).
37).
55).
61).
Spare part number
622329-001