Before The First Use - Vitek MW-2410 BK Manual Instruction

ENGLISH
During the unit's operation and breaks between oper-
•
ation cycles, keep the unit away from children.
The unit is not intended for usage by physically or
•
mentally disabled persons (including children) or by
persons lacking experience or knowledge if they are
not under supervision of a person who is responsible
for their safety or if they are not instructed by this
person on the usage of the unit.
Check the integrity of the power cord periodically.
•
Never use the unit if the power cord or the power
•
plug is damaged, if the unit works improperly or after
it was dropped.
Do not attempt to repair the unit. Do not disassemble
•
the unit by yourself, if any malfunction is detected or
after it was dropped, unplug the unit and apply to any
authorized service center at the contact addresses
given in the warranty certificate and on the website
www.maxwell-products.ru.
To avoid damages, transport the unit in the original
•
package only.
Keep the unit in a dry cool place away from children
•
and disabled persons.
THE UNIT IS INTENDED FOR HOUSEHOLD USE ONLY,
ITS COMMERCIAL USAGE AND USAGE IN PRODUCTION
AREAS AND WORK SPACES IS PROHIBITED.

BEFORE THE FIRST USE

After unit transportation or storage under cold
(winter) conditions, it is necessary to keep it for at
least 3 hours at room temperature before switch-
ing on.
– Unpack the unit and remove any stickers that can pre-
vent unit operation.
– Check the unit for damages; in case of damages do
not use the unit.
– Before switching the unit on, make sure that your
home mains voltage corresponds to the unit operat-
ing voltage.
12
12/20/17 12:54 PM