Setting A Boot Order Preference - HP Compaq tc1100 Software Manual

Setting a Boot Order Preference

After you set a boot order preference:
■
The tablet PC uses your boot order preference each time it is
started or restarted.
■
The logical drive designations used by the system change.
For example, if you set the tablet PC to start up from a
removable hard drive in the External MultiBay, that hard
drive becomes drive C and the system hard drive in the hard
drive bay becomes drive D. Starting up from a NIC does not
affect logical drive designations.
Boot order preferences are set in the Setup utility:
1. To open the Setup utility, turn on or restart the tablet PC.
While the HP logo is displayed and a cursor is flashing in
the upper-right corner of the screen, press the esc button on
the tablet PC, or press
❏
❏
❏
2. Select the Advanced menu. Then:
a. To enable an internal NIC for startup, select Device
b. To set a boot order preference, select Boot, then follow
3. To save your preferences and exit the Setup utility, use the
arrow keys to select Exit > Exit Saving Changes, then follow
the instructions on the screen.
Your preferences are set as you exit the Setup utility and are in
effect when the tablet PC restarts.
Software Guide
To change the language, select Advanced > Languages.
To navigate and select without using an external
keyboard, rotate the jog dial to scroll, and press the
jog dial inward to select.
To navigate and select using an external keyboard, use
the arrow and
Options, then enable PXE/Remote Boot.
the instructions in the right pane of the window.
on an external keyboard.
F10
keys.
enter
Boot Order
6–3