Docking In The Portrait Position - HP Compaq tc1100 Reference Manual

Hp tablet pc series docking station

Hide thumbs Also See for Compaq tc1100:

Table of Contents

Docking in the Portrait Position

Before you begin, place the Docking Station and the docking

stand on a firm, flat surface.

To dock the tablet PC in the portrait position:

1. Align the docking alignment slots on the lower edge of the

tablet PC with the alignment brackets on the docking stand.

Then, while supporting the back of the docking stand with

one hand, lower the tablet PC into the docking stand until the

lower edge of the tablet PC is firmly seated.

Seating the lower edge of the tablet PC in the docking stand in the

portrait position

Reference Guide

To prevent misdocking:

Lower the tablet PC into the docking stand; do not push

the tablet PC against the docking stand.

Lower the 2 alignment slots on the tablet PC onto the

2 alignment brackets on the docking stand simultaneously

and with equal pressure.

The non-skid rubber pads on the bottom edge of the

docking stand should rest against a firm, flat surface, such

as a desk.

Docking and Undocking the Tablet PC

2–5

Table of Contents

Tr1105