Sharp MX-C300P Software Setup Manual page 37

7
The License Agreement window will
appear. Make sure that you understand
the contents of the license agreement
and then click the [Continue] button.
A message will appear asking you if you agree to the
terms of the license. Click the [Agree] button.
• If the license appears in the different language,
change the language in the language menu.
• In Mac OS X v10.4 to 10.7, select the hard drive
and click the [Install] button. Be sure to select the
hard drive on which your operating system is
installed.
In Mac OS X v10.5 to 10.7, you click the [Change
Install Location] button if you change the hard drive
which the printer driver is installed.
8
Click the [Install] button.
Installation begins.
If the "Authenticate" window appears, enter the
password and click the [Install Software] button.
In Mac OS X v10.4 to 10.6, enter the password and
click the [OK] button.
9
When the installation completed screen
appears, click the [Close] button.
This completes the installation of the software. Next,
configure the printer driver settings.
10
Click [System Preference] in the Apple
menu ( ) and select [Print & Scan] (
• If you are using Mac OS X v10.5 to 10.6, click [System
Preferences] in the Apple menu (
& Fax] ( ).
• In Mac OS X v10.4, select [Utilities] from the [Go]
menu and double-click the [Printer Setup Utility](
When the screen for adding a printer appears, click
[Add] and then go to step 12.
* If this is the first time you are installing a printer driver
on your computer, a confirmation message will
appear. Click the [Add] button.
11
Click the button and select "XXXX".
In Mac OS X v10.5 to 10.7, when the screen for adding a
printer appears, click the
MAC OS X
).
) and select [Print
)*.
button.
35