Sharp MX-C300P Software Setup Manual page 28

Hide thumbs Also See for MX-C300P:
Table of Contents

Advertisement

When the PPD driver is installed
1
Click the [Start] button (
[Control Panel], and then click [Devices
and Printers] (or [View devices and
printers]).
• In Windows XP/Server 2003, click the [start] button
and then click [Printers and Faxes].
• In Windows 8/Server 2012, right-click in the startup
window (or swipe upward from the bottom edge), then
select [Taskbar] → [All Applications] → [Control Panel]
→ [Devices and Printers] → [Printers].
• In Windows 8.1, right-click the [Start] button on the
desktop, click [Control Panel] and then click [Device
and Printers].
If [Printers and Faxes] does not appear in the [start]
menu in Windows XP, click the [start] button, click
[Control Panel], click [Printers and Other Hardware],
and then click [Printers and Faxes].
2
Open the printer properties window.
(1) Right-click the printer driver icon of the
machine.
(2) Select [Printer properties].
In Windows XP, select [Properties].
3
Configure the printer driver for the
options installed on the machine.
(1) Click the [Device Settings] tab.
(2) Configure each item based on the
machine configuration.
The items and the procedures for configuring the
items vary depending on the operating system
version.
(3) Click the [OK] button.
You can check the options that are installed on the
machine by printing out the "All Custom Setting List".
(However, note that "Input Tray Options" must be set
to the number of trays on the machine.)
To print out the "All Custom Setting List", see the
Operation Guide.
26
), click

Advertisement

Table of Contents
loading

Table of Contents