Table of Contents
Advertisement
LAMONA Appliances
Installation
Before
the telescopic runners it may be
necessary to remove and replace the existing wire
cavity racks.
Please Note: if your appliance is originally
supplied with telescopic runners, the wire cavity
racks will not need replacing, therefore please
skip directly to adjustment section.
1.
To begin installation ensure the appliance
cavity is cool to the touch and the power is
switched off.
2.
Remove all existing grill pans and shelves.
3.
Use a large cross headed screwdriver to
loosen the tensioning bolts towards the rear of
the cavity.
4.
Please Note: its not necessary to completely
remove these bolts, merely loosen them.
Page _ 19
4.
5.
Adjustment
3.
The telescopic runners can be re positioned at
various levels to suite your needs.
6.
7.
8.
3.
Exclusive to Howdens Joinery.co
The front edge of the wire cavity racks can
then be Un-clipped from the oven cavity and
set aside.
4.
Replace the wire cavity racks with the new
ones supplied buy reversing the above
process, ensuring you remember to re-tighen
the tensioning bolts.
To begin adjustment ensure the appliance
cavity is cool to the touch and the power is
switched off.
Remove all existing grill pans and shelves.
Approaching at an angle, hook the rear edge
of the telescopic runner onto any one of the
bent wires (as pictured below)
8.
Advertisement
Table of Contents
