Table of Contents
Advertisement
9.
Push the runner towards the rear of the oven
cavity, and rotate it until a click can be heard
10. Repeat this process for the opposing side of
the oven, ensuring both runners are located at
the level.
11. Finally extend both runners to their full extent
and position the grill pan or shelf on top,
aligning the front edge with the notch in the
brackets.
11.
9.
www.howdens.com
12. The runners can be removed and repositioned
by gently
(pictured below) and reversing the above
process.
Care & maintenance
The runners are designed to give you good service
and last the life time of your oven.
Never use any un-approved lubricants as this
may become a
risk.
All components can be removed for cleaning with a
warm damp cloth and mild detergent.
The shelf runners should never be submerged,
cleaned with excessive water or be left to soak in
water.
User manual LAM3503/4
the sprung clip downwards
12.
Page _ 20
Advertisement
Table of Contents
