Neckstrap Attachment; Tripod Mounting - Bushnell ENGAGE X Owner's Manual

6. Your binocular should now be adjusted for your eyes. Focusing for any distance can
now be done simply by turning the center focus knob. Make a note of your diopter
setting (position of plus and minus marks on diopter ring relative to index mark on
binocular below the ring) for future reference in case the ring is moved accidentally
or by another person using your binocular. The diopter ring can be pushed down
to lock it in place on the "BEN" prefix models (not BENX or BENDX) to reduce the
chance of accidently moving the ring once it has been set for your vision.

NECKSTRAP ATTACHMENT

To attach the neckstrap, thread the ends of the neckstrap through the strap lug
(Fig. 5) on each side of the binocular, then back through the plastic buckle on
the strap (Fig. 6). Adjust the position of the binoculars on your chest as they hang
around your neck to your preference, by changing the length of the strap section
which passes through the strap channel and buckle by an equal amount on each
side. If you prefer to use an aftermarket strap that has metal O-rings, attach them
to a plastic zip tie placed on the strap lugs rather than installing them directly on
the lug, to avoid damaging the finish on the binocular via contact with the rings.

TRIPOD MOUNTING

To attach the binocular to a tripod or monopod, unscrew the cap which covers the threaded
socket at the far end of the center hinge (Fig. 7), and set it aside in a safe place. Use a compatible
binocular tripod adapter accessory (90
attach your Engage binocular to any standard tripod in a horizontal position to provide a stable
image during prolonged viewing.
WATERPROOF / FOGPROOF
Getting caught in a heavy downpour of rain, or accidentally splashing your Engage binocular during a boating excursion
won't be a problem. The binocular is manufactured and tested to withstand water exposure up to IPX7 standards. Fogproof
protection is achieved from dry Engagegen purging that removes all internal air, which can retain moisture.
All exterior lens surfaces have our new EXO Barrier™ coating (in addition to full multi-coating). EXO Barrier, quite simply,
is the best protective lens coating technology Bushnell has ever developed. Added at the end of the coating process, EXO
Barrier molecularly bonds to the lens and fi lls the microscopic pores in the glass. The result is an ultra-slick coating that
repels water, oil, fog, dust and debris - rain, snow, fi ngerprints and dirt will not stick. EXO Barrier is built to last: the bonded
coating will not fade with the passage of time or normal wear and tear.
Fig. 1 Fig. 1 Eyecup in "Down" Position
(for use with eyeglasses)
Fig. 2 Fig. 2 Eyecup in "Up" Position
(for use (for use without eyeglasses)
angle bracket), such as the Bushnell #161002CM, to
o
Fig. 3
InterPupillary Distance (IPD) Adjustment
Narrow IPD
Wide IPD
Fig. 4 Diopter Adjustment Ring
(Unlocked-model BEN1042)
Fig. 5 Strap Lug
Fig. 7 Tripod Socket Cap
Fig. 6 Strap/Buckle
3