Neckstrap Attachment; Tripod Socket - Bushnell Bear Grylls Instruction Manual

FOCUSING
(Monocular only)
To focus the monocular, simply rotate the orange focusing ring until your subject appears as sharp as possible.
Monoculars do not require an IPD adjustment or diopter adjustment as only one eye is used for viewing. If you
are not wearing eyeglasses, extend the eyecup by twisting it counter-clockwise (to retract, twist the eyecup
clockwise). A lanyard is included with the monocular, which attaches through the lug just below the focusing
ring.

NECKSTRAP ATTACHMENT

Thread the ends of the neckstrap through the strap lugs on each side of the binocular, then back through
the plastic buckle. Adjust the position of the binoculars on your chest as they hang around your neck to your
preference by changing the length of the strap portion which passes through the lug and buckle (by an equal
amount on each side).

TRIPOD SOCKET

The 10x42 Bear Grylls binocular is tripod adaptable. To attach it to a tripod or monopod,
unscrew (counter-clockwise) the "B" logo cap which covers the threaded socket inside
the center hinge, and set it aside in a safe place. Use a compatible binocular tripod
adapter, such as the Bushnell model #161002CM, (an accessory bracket, shown here,
which attaches between the binocular and tripod) to attach your 10x42 binocular to
any standard tripod to provide a stable image during prolonged viewing.
Binocular Tripod
Adapter (optional)
(Bushnell #161002CM)
4