Chapter 3
Using Your CD or DVD Drive
Inserting and Removing a Disc
Inserting a Disc
To load a disc into your computer's drive, complete the following steps:
1. Press the Eject ' button located on the front the drive.
2. Remove a disc from its protective case, holding the disc by its center hole and
outer edge to avoid touching the surface.
3. Place the disc into the round area of the tray. The side you want to play should
face down in the tray. Gently push down on the disc over the center spindle of
the tray until the disc snaps into place.
Inserting a Disc into the Drive
4. Push the tray back into the drive until the drive locks into place.
`
CAUTION: When inserting a disc, be sure to press the disc over the center spindle on
the disc tray until the disc snaps into place. You can damage the disc or your
computer if the disc is not installed properly.
Using Your CD or DVD Drive
3-1