Putting Your Computer Into Sleep Mode; Resuming From Sleep Or Hibernation Mode; Adjusting Power Settings; Changing Your Power Management Settings In Microsoft Windows - HP Compaq Presario,Presario 1700 Reference Manual

Putting Your Computer into Sleep Mode

You may put your computer into Sleep mode manually by pressing the Fn+F4 keys
simultaneously.
Another way to put your computer into Sleep mode manually is to click Start,
point to the Shut Down option, and click Standby from the list of choices.
`
CAUTION: While in Sleep mode, your computer will maintain system information and
open files. Unsaved information is lost if you turn off your computer before you end
Sleep mode.

Resuming from Sleep or Hibernation Mode

To begin using your computer from Sleep or Hibernation mode, complete one of
the following steps:
From Sleep – Press the spacebar.
From Hibernation – Press the Power button.

Adjusting Power Settings

You can create different power settings, or power schemes, under which your
computer will go into Sleep mode. The optional settings are Home/Office Desk,
Portable/Laptop, and Always On. These default settings will work for most users.
You can adjust the settings for your work habits. You are able to change the
following:
when your computer goes into Sleep (Standby) mode
when the screen times out and goes blank
when the hard drive goes into low power mode

Changing Your Power Management Settings in Microsoft Windows

To change the power management settings, complete the following steps:
1. Click the Start button from the Windows Taskbar.
2. Point to Settings .
3. Click Control Panel .
4. Double-click the Power Management
Saving Energy with Sleep and Power Management
æ
icon.
8-3