Pcie-6002 Card Configuration Example; Configuration Example; Smart Ec Maxcore System - SMART PCIE-6002 Installation And Use Manual

PCIE-6002 Card Configuration Example

A.1

Configuration Example

This section provides information required to configure M.2 AHCI or NVMe SSDs on a
PCIE-6002 card to the CPUs on the host PCIe cards in the SMART Embedded Computing
MaxCore system and also in any other third-party systems.
A.1.1

SMART EC MaxCore System

The System Services Framework (SSF) management system provides the MaxCore
operator console which enables the user to connect each M.2 AHCI or NVMe SSD on a
PCIE-6002 card to any CPU on a SharpServer PCIE-7410 card or SharpStreamer Pro
PCIE-7210 card in the same box.
The PCIE-6002 M.2 AHCI/NVMe SSD will show up in the CPUs PCIe device tree after
booting the CPUs, along with many other PCIe devices which were connected by SSF to a
CPU. This M.2 AHCI/NVMe SSD can be mounted at run time but can also be used as boot
device. All four module slots are accessible in an 8-lane MaxCore slot. The amount and
location of 8-lane slots differs depending on the MaxCore platform being used.
For more information on how to assign individual M.2 AHCI or NVMe SSD modules to
CPUs within the system, refer to SSF for MaxCore MC3000 Platform GUI Help.
PCIE-6002 Installation and Use (6806800U70B)
Appendix A
47