Hardware Preparation And Installation; Overview; Unpacking And Inspecting Pcie-6002 Card - SMART PCIE-6002 Installation And Use Manual

Hardware Preparation and Installation

2.1

Overview

This chapter provides information on unpacking and inspecting the card procedures and
safety precautions to be followed while handling the card. The environmental, thermal, and
power requirements, and the installation and removal procedures of the card are also
explained in this chapter.
2.2

Unpacking and Inspecting PCIE-6002 Card

Damage of Circuits
Electrostatic discharge and incorrect installation and removal of the card can
damage circuits or shorten their life.
Make sure that you are working in an ESD-safe environment, before touching the
card or electronic components.
Make sure the card is thoroughly inspected before shipment. If any damage has
occurred during transportation please contact us via our web page at:
https://www.smartembedded.com/ec/support/
Shipment Inspection
To inspect the shipment, perform the following steps:
1. Verify that you have received all items of your shipment:

One PCIE-6002 card.
 Four (4) M2.5 x 4 mm screws.
 Four (4) M2.5 x 4 mm shoulder screws (these screws are used to attach the SSD
module to the PCIE card).
 Four (4) 6 mm long (diameter 3 mm) M2.5 hex standoffs.
 One printed copy of Quick Start Guide.
 One printed copy of Safety Notes Summary.
PCIE-6002 Installation and Use (6806800U70B)
NOTICE
.
Chapter 2
27