Hardware Preparation and Installation
2.3.2
Power Requirements
The PCIE-6002 payload card accepts single and double-sided modules up to a power
consumption of 10W per module. The module interface must comply with the NVMe (NVM
Express) standard. In case of MaxCore platforms, the MaxCore system reads the thermal
sensors and provides sufficient cooling.
The following table provides the typical power consumed by a PCIE-6002 card.
Table 2-2
Mode
Idle
Active
Peak
Idle: Drives are powered, but not being actively utilized.
Active: When the drives are being utilized at room temperature.
Peak: When the drives are being utilized at 40°C ambient temperature.
2.4
Weight and Dimensions
The following table provides weight and dimensions of PCIE-6002 card.
Table 2-3
Feature
Height
Length
Width
Weight
Front Panel Width
30
Power Requirements
PCIe slot power
15 Watts
52 Watts
75 Watts
Weight and Dimensions
Value
111.15 mm (4.37 inches)
312.00 mm (12.28 inches)
14.47 mm (0.57 inches)
0.16 kg (0.35 lb)
14.47 mm (0.57 inches)
Hardware Preparation and Installation
PCIE-6002 Installation and Use (6806800U70B)